Motorboat Surf Rescue

The Surf Rescue motorboat with three chambers and a GRP body is a very maneuverable and very fast boat which has been used in the Atlantic and the Pacific for some years for lifesaving service. The boat is designed for the use in waves but has also been well accepted in flat waters. Designed for a two-man crew, it is relatively easy to launch and extremely well maneuverable. Offer without engine!
 

Specifications:

The boats are fitted as follows:

- 3 x Air compartments

- 6 x Soft carry handles

- Bow dodger

- 2 x Self draining scuppers

- 3 x Stainless steel U-bolts, one in bow and 2 on transom

- 1 x Motor plate

- 2 x Foot straps

- 3 x Fuel line loops

- 1 x Tank tie

- 2 x Paddles and holders

- 1 x Torpedoe buoy holders

- 1 x Jockey rope and handle

- Front bow splash rail

- Grab rope and rail

- 1 x Righting rope and arrow

- Crew & Drive scuff patches

- Crew & Drive handles

- Pump and repair kit

Built with GFK body and recommended for 2 Rescuers in the boat.

Recommended for a up to 25 hp Engine.

Suggested:

Max HP on 3.60m boat 30HP / max 30PS

Max HP on 3.90m boat 40HP / max 40PS

Above HP is two stroke. If you are going to use four stroke be careful of engine weight.

3.60 Max engine weight +- 60KG

3.90 Max engine weight +- 80KG

Engine must be short shaft.

The boats we were getting lately were 3,6m boats as they were more flexible and better to be carried with few persons (fitting the standard Lifeguard stations at the Baltic sea and the French and Spanish border).

Phone: 00491716271777 or Mail